How to Eliminate Moisture in the Cellar?
Language
Helske

How to Eliminate Moisture in the Cellar?

Cellars are usually rooms with high humidity. They are situated under the ground and the soil, which is the source of water, can penetrate into their walls. Cellars are often used for storing various things, furniture, clothes etc. which may be attacked by moulds due to moisture.

Excessive humidity in the cellar can be eliminated also by applying the Nano Coat System active building material.

Thanks to this special mixture developed with nanotechnology, you can tackle the problems with humidity effectively. By applying it to the walls, a thermal reflective layer is formed which reflects thermal radiation back to the room but permeates water vapour. It removes excessive humidity and, consequently, prevents the appearance of moulds. Its application prevents the condensation of moisture on the surface of the walls and the ceilings, so the walls can breathe naturally.



Which Places Should the Material be Applied to in the Cellar?

Apply the Nano Coat System to all the walls and the ceiling of the cellar. You can apply it also to all the circumferential walls (facade, external walls) or to the places where thermal bridges are present. Combined with external insulation, the Nano Coat System is an ideal solution to moisture in the cellar.

Nano Coat System consists of: 

Nano PT - represents deep penetration that stabilizes the foundations. It is used for absorbent cohesive surfaces and is applied with a brush or roller.

Nano AM - it is used on all other surfaces where we can not use Nano PT. Thus, non-absorbent cohesive surfaces such as glass, iron and others. Apply with a brush or roller.

Nano TC - it is used to repair holes, cracks and small irregularities of size up to 3-4mm.

Nano Coat Homethe final layer of mass applied by a stainless comb trowel to a pre-treated, smooth surface of about 2 mm thick. After drying, grind the surface with sandpaper.


Apply in the following order: 

1. Nano PT or Nano AM,

2. Nano TC, if necessary to repair the surface,

3. final layer Nano Coat Home.

RECOMMENDED

Get In Touch!

YOUR CONTACT FOR QUESTIONS ABOUT HELSKE ENERGY SAVE®:

CSS@HELSKE.COM