How to get of mold around windows and doors in a room adjacent to the porch?
Language
Helske

How to get of mold around windows and doors in a room adjacent to the porch?

The source of moisture around the windows and doors leading to the porch is the condensation of water vapor on the walls. Thermal bridges are also to blame (mainly around sunction).

Nano Coat System helps to prevent mold formation. It is a special material that was developed using the modern nanotechnology.

The material diminishes the risk of mold formation thanks to a thermo-reflective layer that reflects the heat back into the room, while also allowing water to vaporize. The material also prevents dampness from forming on the walls and ceilings, so the walls can breathe.



On which parts of the room should the material be applied?

The Nano Coat System should be applied to the walls and scuntion in the vicinity of the windows and doors leading to the porch.

Nano Coat System consists of: 

Nano PT - represents deep penetration that stabilizes the foundations. It is used for absorbent cohesive surfaces and is applied with a brush or roller.

Nano AM - it is used on all other surfaces where we can not use Nano PT. Thus, non-absorbent cohesive surfaces such as glass, iron and others. Apply with a brush or roller.

Nano TC - it is used to repair holes, cracks and small irregularities of size up to 3-4mm.

Nano Coat Home the final layer of mass applied by a stainless comb trowel to a pre-treated, smooth surface of about 2 mm thick. After drying, grind the surface with sandpaper.

 

Apply in the following order: 

1. Nano PT or Nano AM,

2. Nano TC, if necessary to repair the surface,

3. final layer Nano Coat Home.


 

RECOMMENDED

Get In Touch!

YOUR CONTACT FOR QUESTIONS ABOUT HELSKE ENERGY SAVE®:

CCS@HELSKE.COM