How to get rid of mold in the rooms adjacent to the sunroom?
Language
Helske

How to get rid of mold in the rooms adjacent to the sunroom?

Mold in the rooms adjacent to the porch can form on a common wall, thermal bridges, in the vicinity of windows and doors.

The Nano Coat System, a special active building material that is developed by modern nanotechnology, can also prevent mold formation in the rooms adjacent to the porch.

The material diminishes the risk of mold formation thanks to a thermo-reflective layer that reflects the heat back into the room, while also allowing water to vaporize. The material also prevents dampness from forming on the walls and ceilings, so the walls can breathe.



On which parts of the room should the material be applied?

Apply Nano Coat System to all common walls or to places where thermal bridges are located, in the vicinity of windows and doors as the condensation of water vapor can occur in their surroundings.

If your walls are already infested by mold, it is important first to get rid of it and repair the wall construction, and only then apply the material.

Nano Coat System consists of: 

Nano PT - represents deep penetration that stabilizes the foundations. It is used for absorbent cohesive surfaces and is applied with a brush or roller.

Nano AM - it is used on all other surfaces where we can not use Nano PT. Thus, non-absorbent cohesive surfaces such as glass, iron and others. Apply with a brush or roller.

Nano TC - it is used to repair holes, cracks and small irregularities of size up to 3-4mm.

Nano Coat Homethe final layer of mass applied by a stainless comb trowel to a pre-treated, smooth surface of about 2 mm thick. After drying, grind the surface with sandpaper.

 

Apply in the following order: 

1. Nano PT or Nano AM,

2. Nano TC, if necessary to repair the surface,

3. final layer Nano Coat Home.

RECOMMENDED

Get In Touch!

YOUR CONTACT FOR QUESTIONS ABOUT HELSKE ENERGY SAVE®:

CCS@HELSKE.COM