How to Maintain an Ideal Microclimate in the Pantry by Applying the Nano Coat System
Language
Helske

How to Maintain an Ideal Microclimate in the Pantry by Applying the Nano Coat System

It is very important to store foodstuff in a proper way that prevents the appearance of moulds which have an adverse effect on our health. It is not only about the way of storing the food but primarily about a suitable microclimate in the room. Undesirable humidity has to be eliminated and a stable temperature maintained to prevent the spoilage of foods with short shelf life.

These problems can be tackled simply and effectively by applying the Nano Coat System active layer.

The Nano Coat System material was specially developed by the Helske company based on the principle of nanotechnologies. It creates a thermal reflective layer on the walls which reflects thermal radiation back to the room. It works vice versa, too: it maintains desirable cooler air in the pantry. By applying this active substance, you can maintain a stable microclimate in the room.

At the same time, the Nano Coat System is an efficient form of anti-mould prevention. It is designed to permeate moisture, reducing the risk of the formation of moulds and the development of allergies. The material is warm to the touch and retains its high brightness. In this way, you can create a lasting ideal microclimate in the pantry quite simply and at no great expense.



Which Places Should the Material be Applied to in the Pantry?

The system can be applied to all the walls of the pantry, including the ceiling. Apply it also to the places where heat escapes and water vapours condense, which can be prevented with the Nano Coat System. Apply the substance also to all the circumferential walls (façade, external walls) or to the places where thermal bridges are present. Another advantage of the system is its applicability to non-absorbent surfaces, such as wall tiles, floor tiles, marble, glass etc.

Nano Coat System consists of: 

Nano PT - represents deep penetration that stabilizes the foundations. It is used for absorbent cohesive surfaces and is applied with a brush or roller.

Nano AM - it is used on all other surfaces where we can not use Nano PT. Thus, non-absorbent cohesive surfaces such as glass, iron and others. Apply with a brush or roller.

Nano TC - it is used to repair holes, cracks and small irregularities of size up to 3-4mm.

Nano Coat Homethe final layer of mass applied by a stainless comb trowel to a pre-treated, smooth surface of about 2 mm thick. After drying, grind the surface with sandpaper.
 

Apply in the following order: 

 1. Nano PT or Nano AM,

2. Nano TC, if necessary to repair the surface,

3. final layer Nano Coat Home.

 

RECOMMENDED

Get In Touch!

YOUR CONTACT FOR QUESTIONS ABOUT HELSKE ENERGY SAVE®:

CCS@HELSKE.COM