How to Maintain Heat and Prevent its Escape in Rooms Adjacent to a Garage?

How to Maintain Heat and Prevent its Escape in Rooms Adjacent to a Garage?

Heat loss can be a problem if the garage is built next to the house in a way that it shares a wall with the house. In this point, there is heat loss and cold because the garage is unheated and water vapours condense. In addition, there is a high risk of the appearance of moulds on the wall.

If you want to prevent rapid heat loss, shorten the heating time, and achieve a pleasant climate in the room adjacent to a garage, apply the Nano Coat System active building material.

This special mixture, developed with state-of-the-art nanotechnology, helps maintain a stable temperature in the room adjacent to a garage. The material creates a thermal reflective layer which reflects thermal radiation back to the room while removing excessive moisture. It eliminates the cold spots on the walls.

Which Places Should the Material be Applied to in the Room?

Apply the Nano Coat System especially to the walls adjacent to the garage, around the door leading to the garage, because that is where heat is lost and water vapours condense, which the Nano Coat System prevents.

Nano Coat System consists of: 

Nano PT - represents deep penetration that stabilizes the foundations. It is used for absorbent cohesive surfaces and is applied with a brush or roller.

Nano AM - it is used on all other surfaces where we can not use Nano PT. Thus, non-absorbent cohesive surfaces such as glass, iron and others. Apply with a brush or roller.

Nano TC - it is used to repair holes, cracks and small irregularities of size up to 3-4mm.

Nano Coat Homethe final layer of mass applied by a stainless comb trowel to a pre-treated, smooth surface of about 2 mm thick. After drying, grind the surface with sandpaper.


Apply in the following order: 

 1. Nano PT or Nano AM,

2. Nano TC, if necessary to repair the surface,

3. final layer Nano Coat Home.



Get In Touch!