How to prevent heat loss in the room adjacent to the sunroom?

How to prevent heat loss in the room adjacent to the sunroom?

Heat from the room adjacent to the sunroom may escape through common walls, thermal bridges or through window and door hinges.

To prevent rapid heat loss, reduce heating time and ensure a comfortable room climate, apply the active building material Nano Coat System.

The special material developed using modern nanotechnology helps maintain a stable room temperature in the room adjacent to the porch. The material creates a thermo-reflective layer that reflects heat back into the room while removing excess moisture. It actively regulates the climate and distributes the heat throughout the room. It also eliminates cold places on the walls. Thanks to these properties, the material shortens the heating time and saves energy.

On which parts of the room should the material be applied?

Apply Nano Coat System on the walls adjacent to the sunroom, scuntion in the vicinity of the windows and doors as the largest heat loss and condensation of the water vapor happen there.


Nano Coat System consists of: 

Nano PT - represents deep penetration that stabilizes the foundations. It is used for absorbent cohesive surfaces and is applied with a brush or roller.

Nano AM - it is used on all other surfaces where we can not use Nano PT. Thus, non-absorbent cohesive surfaces such as glass, iron and others. Apply with a brush or roller.

Nano TC - it is used to repair holes, cracks and small irregularities of size up to 3-4mm.

Nano Coat Home – the final layer of mass applied by a stainless comb trowel to a pre-treated, smooth surface of about 2 mm thick. After drying, grind the surface with sandpaper.

Apply in the following order: 

1. Nano PT or Nano AM,

2. Nano TC, if necessary to repair the surface,

3. final layer Nano Coat Home.


Get In Touch!