How to treat bedrooms of allergic persons using Nano Coat System
Language
Helske

How to treat bedrooms of allergic persons using Nano Coat System

A bedroom of a person suffering from allergies has to meet strict hygiene conditions. It is necessary to look not only at aesthetics and design, but also on the functionality and properties of the different materials we use in the room. A healthy environment influences not only the immunity and health, but also psychological well-being.

The ideal humidity in the bedroom is around 40%. Moisture above 60% and interior temperature above 22 ° C lead to mold formation. Spores of molds are then released into the air and may cause hypersensitivity when inhaled. This can lead to breathing problems, sinusitis, bloated nose, or headaches. The problems may lead to life-long allergies or even asthma.

In order to create a healthy environment, it is necessary to think in advance and use proper materials.

The Nano Coat System was developed with a special technology based on nanostructures. The breathable material ensures that the walls naturally breathe and allows water vapor to pass through the structure. It also prevents condensation of water vapor on the surface of the wall, reducing the risk of mold formation. This material has an antibacterial surface and is suitable for rooms where people suffering from allergies live.




On which parts of the bedroom should the material be applied?

You can apply the system to all room walls, including the ceiling, sunction, in the vicinity of the windows and balconies, as the largest heat loss and condensation of the water vapor happen there, to all peripheral (facade, exterior) walls or to places where thermal bridges are located.

Nano Coat System consists of: 

Nano PT - represents deep penetration that stabilizes the foundations. It is used for absorbent cohesive surfaces and is applied with a brush or roller.

Nano AM - it is used on all other surfaces where we can not use Nano PT. Thus, non-absorbent cohesive surfaces such as glass, iron and others. Apply with a brush or roller.

Nano TC - it is used to repair holes, cracks and small irregularities of size up to 3-4mm.

Nano Coat Homethe final layer of mass applied by a stainless comb trowel to a pre-treated, smooth surface of about 2 mm thick. After drying, grind the surface with sandpaper.


Apply in the following order: 

1. Nano PT or Nano AM,

2. Nano TC, if necessary to repair the surface,

3. final layer Nano Coat Home.


 

RECOMMENDED

Get In Touch!

YOUR CONTACT FOR QUESTIONS ABOUT HELSKE ENERGY SAVE®:

CSS@HELSKE.COM