How to Treat the Ceiling in the Bathroom and Prevent the Appearance of Moulds with the Nano Coat System
Language
Helske

How to Treat the Ceiling in the Bathroom and Prevent the Appearance of Moulds with the Nano Coat System

Increased humidity in the bathroom causes water vapours to condense on the surface of the walls. They often condense on the ceiling which is inaccessible for routine cleaning with disinfectants. Permanently high humidity and wet walls form ideal conditions for the appearance of moulds which are harmful to health because they release spores that cause various respiratory problems, allergies or eczemas.

Treat the ceiling of your bathroom as a preventive measure by applying the Nano Coat System. The Helske company has developed a special active substance based on nanostructures which offers several amazing features.

The Nano Coat System is vapour permeable, so moisture does not stay in the bathroom but escapes through the structure. On the other hand, it creates a certain texture on the surface of the wall, which reflects heat and the bathroom stays pleasantly warm. Another wonderful advantage of the Nano Coat System is that you can combine products as you wish. For example, if you use the Nano AM special primer, the substance may be subsequently applied even to non-absorbent surfaces, such as wall tiles, glass, iron or floor tiles. In this way, you can treat the ceiling of your bathroom preventively, regardless of the material it is made of.



Which Places Should the Material be Applied to in the Bathroom?

The system can be applied to all the walls of the bathroom, including the whole surface of the ceiling. Apply it also to the reveals around the windows that is the place where water vapours condense, which can be prevented with the Nano Coat System. Apply the substance also to all the circumferential walls (façade, external walls) or to the places where thermal bridges are present. Apply it to all the problematic places where the risk of the appearance of moulds is greater. Another advantage of the system is its applicability to non-absorbent surfaces, such as wall tiles, floor tiles, marble, glass etc.

Nano Coat System consists of: 

Nano PT - represents deep penetration that stabilizes the foundations. It is used for absorbent cohesive surfaces and is applied with a brush or roller.

Nano AM - it is used on all other surfaces where we can not use Nano PT. Thus, non-absorbent cohesive surfaces such as glass, iron and others. Apply with a brush or roller.

Nano TC - it is used to repair holes, cracks and small irregularities of size up to 3-4mm.

Nano Coat Homethe final layer of mass applied by a stainless comb trowel to a pre-treated, smooth surface of about 2 mm thick. After drying, grind the surface with sandpaper.


Apply in the following order: 

1. Nano PT or Nano AM,

2. Nano TC, if necessary to repair the surface,

3. final layer Nano Coat Home.

RECOMMENDED

Get In Touch!

YOUR CONTACT FOR QUESTIONS ABOUT HELSKE ENERGY SAVE®:

CCS@HELSKE.COM