How to Treat the Walls of the Living Room for Allergics with the Nano Coat System
Language
Helske

How to Treat the Walls of the Living Room for Allergics with the Nano Coat System

In households where allergics stay, it is important to eliminate all the things which cause health problems for them. Such problems arise in shared rooms, such as a living room, if moulds appear because of increased humidity and because of the condensation of water vapours on the surface of the walls. Moulds are dangerous for allergics because they release spores into the air, causing respiratory problems, eczemas, cough and other allergic reactions.

It is important to bear in mind creating a healthy environment for allergics from the very beginning, from the first ever treatment of the walls.

The Nano Coat System has been developed with special technology based on nanostructures. This permeable material ensures the natural breathing of the walls and enables the passage of water vapour through the structure. At the same time, it prevents the condensation of water vapours on the surface of the walls, reducing the risk of the appearance of moulds. The system has an antibacterial surface and is suitable for rooms where allergics stay.




Which Places Should the Material be Applied to in the Living Room?

The system can be applied to all the walls of the room, including the ceiling. Apply it also to the reveals around the windows and the entrances to the balcony because these are the places where heat escapes and water vapours condense, which can be prevented by the Nano Coat System. Apply the substance also to all the circumferential walls (façade, external walls) or to the places where thermal bridges are present.

Nano Coat System consists of: 

Nano PT - represents deep penetration that stabilizes the foundations. It is used for absorbent cohesive surfaces and is applied with a brush or roller.

Nano AM - it is used on all other surfaces where we can not use Nano PT. Thus, non-absorbent cohesive surfaces such as glass, iron and others. Apply with a brush or roller.

Nano TC - it is used to repair holes, cracks and small irregularities of size up to 3-4mm.

Nano Coat Homethe final layer of mass applied by a stainless comb trowel to a pre-treated, smooth surface of about 2 mm thick. After drying, grind the surface with sandpaper.


Apply in the following order: 

1. Nano PT or Nano AM,

2. Nano TC, if necessary to repair the surface,

3. final layer Nano Coat Home.

RECOMMENDED

Get In Touch!

YOUR CONTACT FOR QUESTIONS ABOUT HELSKE ENERGY SAVE®:

CCS@HELSKE.COM