The Solution How to Eliminate Humidity in the Kitchen by Applying Nano Coat System to Problematic Areas

The Solution How to Eliminate Humidity in the Kitchen by Applying Nano Coat System to Problematic Areas

The kitchen is one of the rooms with highest humidity in the house or flat due to the vapours produced during cooking. This is frequently accompanied by the condensation of the water vapours on the surface of the walls, especially in problematic areas where, for example, thermal bridges are present.This leads to the appearance of moulds which are dangerous to health because they release spores into the air which cause allergic reactions, upper respiratory tract infections, cough, eczemas or asthma. From a long-term perspective, their presence is very damaging to health. Treat the walls as a preventive measure and eliminate the risk of the appearance of moulds in the very beginning. The solution is to apply the Nano Coat System building material.

The Nano Coat System has been developed with special technology based on nanostructures. This permeable material ensures the natural breathing of the walls and enables the passage of water vapour through the structure. By applying the Nano Coat System, you can reduce humidity in the kitchen by even 10%. At the same time, it prevents the condensation of water vapours on the surface of the walls, reducing the risk of the appearance of moulds. The system is suitable to all the rooms where food is present, since it complies with the EU requirements for the certification of food contact materials and has an antibacterial surface. It also absorbs the odours produced during cooking.

Which Places Should the Material be Applied to in the Kitchen?

The system can be applied to all the walls of the kitchen, including the ceiling. Apply it also to the reveals around the windows and the entrances to the balcony because these are the places where heat escapes and water vapours condense, which can be prevented by the Nano Coat System. Apply the substance also to all the circumferential walls (façade, external walls) or to the places where thermal bridges are present. Another advantage of the system is its applicability to non-absorbent surfaces, such as wall tiles, floor tiles, marble, glass etc.

Nano Coat System consists of: 

Nano PT - represents deep penetration that stabilizes the foundations. It is used for absorbent cohesive surfaces and is applied with a brush or roller.

Nano AM - it is used on all other surfaces where we can not use Nano PT. Thus, non-absorbent cohesive surfaces such as glass, iron and others. Apply with a brush or roller.

Nano TC - it is used to repair holes, cracks and small irregularities of size up to 3-4mm.

Nano Coat Homethe final layer of mass applied by a stainless comb trowel to a pre-treated, smooth surface of about 2 mm thick. After drying, grind the surface with sandpaper.

Apply in the following order: 

 1. Nano PT or Nano AM,

2. Nano TC, if necessary to repair the surface,

3. final layer Nano Coat Home.


Get In Touch!